ASTM D 6834-2002 测定有机械泵分配器的包装的产品泄漏率的标准试验方法
作者:标准资料网 时间:2024-05-18 10:41:50 浏览:8494
来源:标准资料网
【英文标准名称】:StandardTestMethodforDeterminingProductLeakagefromaPackagewithaMechanicalPumpDispenser
【原文标准名称】:测定有机械泵分配器的包装的产品泄漏率的标准试验方法
【标准号】:ASTMD6834-2002
【标准状态】:现行
【国别】:美国
【发布日期】:2002
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:J71
【国际标准分类号】:55_020
【页数】:2P;A4
【正文语种】:英语
基本信息
标准名称: | 刻模铣床 第2部分:技术条件 |
英文名称: | Pantograph engraving machines-Part 2:Specifications |
中标分类: |
机械 >>
金属切削机床 >>
钻、镗、铣床 |
ICS分类: |
机械制造 >>
机床 >>
镗床和铣床
|
替代情况: | 替代JB/T 4067.2-1996 |
发布部门: | 国家发展和改革委员会 |
发布日期: | 2006-11-27 |
实施日期: | 2007-05-01 |
首发日期: | |
作废日期: | |
主管部门: | 国家发展和改革委员会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国金属切削机床标准化技术委员会 |
起草单位: | 昆明铣床厂 |
起草人: | 韩玉稳、谭肇康 |
出版社: | 机械工业出版社 |
出版日期: | 2007-05-01 |
页数: | 6页 |
批文号: | 19241-2007 |
书号: | 15111·8040 |
适用范围
JB/T 4067的本部分规定了刻模铣床的设计、制造和验收要求。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 金属切削机床 钻 镗 铣床 机械制造 机床 镗床和铣床
【英文标准名称】:StandardSpecificationforNormalizedHigh-StrengthLow-AlloyStructuralSteelPlates
【原文标准名称】:标准化的高强度低合金钢板标准规范
【标准号】:ASTMA633/A633M-2001(2006)
【标准状态】:现行
【国别】:
【发布日期】:2001
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.02
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:boltedconstruction;high-strength;low-allow;lowambienttemperatures;normalized;notchtoughness;plates;rivetedconstruction;steel;structuralsteel;weldedconstruction
【摘要】:1.1Thisspecificationcoversnormalizedhigh-strengthlow-alloystructuralsteelplatesforwelded,riveted,orboltedconstruction.1.2Thismaterialisparticularlysuitedforserviceatlowambienttemperaturesof50F[45C]andhigherwherenotchtoughnessbetterthanthatexpectedinas-rolledmaterialofacomparablestrengthlevelisdesired.1.3Fourgrades,designatedGradesA,C,D,andE(essentiallyformerSpecificationA633withoutagradedesignation)arecoveredbythisspecification.GradeAprovidesaminimumyieldpointof42ksi[290MPa]inthicknessesthrough4in.[100mm],inclusive.GradesCandDprovideaminimumyieldpointof50ksi[345MPa]inthicknessesupto2.50in.[65mm],inclusiveand46.0ksi[315MPa]inthicknessesover2.50in.to4.0in.[65to100mm],inclusive.GradeEprovidesaminimumyieldpointof60ksi[415MPa]inthicknessesupto4.0in.[100mm],inclusiveand55ksi[380MPa]inthicknessesover4in.to6in.[100to150mm],inclusive.1.4Currentpracticenormallylimitsplatesfurnishedunderthisspecificationtothemaximumthicknessesshownin1.3.Theindividualmanufacturershouldbeconsultedonsizelimitationsforotherproductforms.1.5Whenthesteelistobewelded,itispresupposedthataweldingproceduresuitableforthegradeofsteelandintendeduseorservicewillbeutilized.SeeAppendixX3noidfoundofSpecificationA6/A6Mforinformationonweldability.1.6Thevaluesstatedineitherinch-poundunitsorSIunitsaretoberegardedasstandard.Withinthetext,theSIunitsareshowninbrackets.Thevaluesstatedineachsystemarenotexactequivalents;therefore,eachsystemmustbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnonconformancewiththisspecification.
【中国标准分类号】:
【国际标准分类号】:77_140_10
【页数】:3P.;A4
【正文语种】: