热门站点| 世界资料网 | 专利资料网 | 世界资料网论坛
收藏本站| 设为首页| 首页

SAE J551/4 Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadban

作者:标准资料网 时间:2024-05-16 20:13:20  浏览:8250   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J551/4
Title:Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz
Issuing Committee:Electromagnetic Compatibility (Emc) Standards
Scope: This SAE Standard contains test limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 1000 MHz. The document applies to any electronic/electrical component intended for use in vehicles. Refer to International Telecommunications Union (ITU) Publications for details of frequency allocations. The test limits are intended to provide protection for receivers installed in a vehicle from disturbances produced by components/ modules in the same vehicle. The receiver types to be protected are: broadcast radio and TV, land-mobile radio, radio telephone, amateur and citizens' radio. The limits in this document are recommended and subject to modification as agreed between the vehicle manufacturer and the component supplier. This document shall also be applied by manufacturers and suppliers of components and equipment which are to be added and connected to the vehicle harness or to an on-board power connector after delivery of the vehicle. This document does not include protection of electronic control systems from RF emissions, or from transient or pulse type voltage fluctuations. These subjects are covered in other sections of SAE J551 and in SAE J1113.
下载地址: 点击此处下载
【英文标准名称】:Aerospaceseries-Washers,wirelocking,incorrosionresistingsteel-passivated;GermanversionEN2949:1996
【原文标准名称】:航空航天系列.钝化耐蚀钢锁紧垫圈
【标准号】:EN2949-1996
【标准状态】:现行
【国别】:
【发布日期】:1996-12
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:系耳;薄钢板;钝化;航空航天运输;规范(验收);名称与符号;航空运输;航天运输;尺寸公差;尺寸;有耳垫圈;耐蚀钢
【英文主题词】:Aerospacetransport;Airtransport;Anchorages;Attachinglugs;Corrosion-resistantsteels;Designations;Dimensionaltolerances;Dimensions;Passivated;Sheetsteels;Spacetransport;Specification(approval);Tabwashers
【摘要】:
【中国标准分类号】:V21
【国际标准分类号】:49_030_50
【页数】:6P.;A4
【正文语种】:英语


【英文标准名称】:Dentalrotaryinstruments.Cutters.Specificationforsteellaboratorycutters
【原文标准名称】:牙科用旋转器械.第8部分:切割器.第1节:实验室用钢制切割器规范
【标准号】:BS6828Sec.8.1-1987
【标准状态】:作废
【国别】:英国
【发布日期】:1987-05-29
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:尺寸;牙科器械;牙钻;统计质量控制;钢;刀片;牙科旋切器;去毛刺磨石;钻头;实验室设备;切削工具;牙科设备;牙科学
【英文主题词】:
【摘要】:
【中国标准分类号】:C33
【国际标准分类号】:
【页数】:12P;A4
【正文语种】:英语



版权声明:所有资料均为作者提供或网友推荐收集整理而来,仅供爱好者学习和研究使用,版权归原作者所有。
如本站内容有侵犯您的合法权益,请和我们取得联系,我们将立即改正或删除。
京ICP备14017250号-1